Monday, November 23, 2020

CLI OLT ZTE C320

OLT ZTE C320


### CHECKING ONT STATUS


GPON#show gpon onu state gpon-olt_1/2/3

OnuIndex   Admin State  OMCC State  Phase State  Channel

--------------------------------------------------------------

1/2/3:1     enable       disable     OffLine      1(GPON)

1/2/3:2     enable       disable     OffLine      1(GPON)

1/2/3:3     enable       disable     OffLine      1(GPON)

1/2/3:4     enable       disable     OffLine      1(GPON)

1/2/3:5     enable       disable     OffLine      1(GPON)

1/2/3:6     enable       disable     OffLine      1(GPON)

1/2/3:7     enable       disable     OffLine      1(GPON)

1/2/3:8     enable       disable     OffLine      1(GPON)

1/2/3:9     enable       disable     OffLine      1(GPON)

1/2/3:10    enable       disable     OffLine      1(GPON)

1/2/3:11    enable       disable     OffLine      1(GPON)

1/2/3:12    enable       disable     OffLine      1(GPON)

1/2/3:13    enable       disable     OffLine      1(GPON)

1/2/3:14    enable       disable     OffLine      1(GPON)

1/2/3:15    enable       disable     OffLine      1(GPON)

1/2/3:16    enable       disable     OffLine      1(GPON)

1/2/3:17    enable       disable     OffLine      1(GPON) => modem 

1/2/3:18    enable       disable     working      1(GPON) => modem operate normaly




### CHECKING ONT POWER


GPON-JKT-KBJ#show pon power attenuation gpon-onu_1/2/3:18

           OLT                  ONU              Attenuation

--------------------------------------------------------------------------

 up      Rx :no signal         Tx:N/A               N/A


 down    Tx :6.892(dbm)        Rx:N/A               N/A




### CHECKING ONT MAC ADDRESS


GPON-JKT-KBJ#show mac gpon onu gpon-onu_1/2/3:18

Total mac address : 0




### CHEKING ONT UPTIME AND ONT HISTORY LOGS


GPON#show gpon onu detail-info gpon-onu_1/2/3:18


ONU interface:         gpon-onu_1/2/3:18

  Name:                ONU-3:18

  Type:                ZTE-F660

  State:               ready

  Configured channel:  auto

  Current channel:     1(GPON)

  Admin state:         enable

  Phase state:         OffLine

  Config state:        success

  Authentication mode: sn

  SN Bind:             enable with SN check

  Serial number:       ZTEGC123456F

  Password:

  Description:         ONU-3:18

  Vport mode:          gemport

  DBA Mode:            Hybrid

  ONU Status:          enable

  OMCI BW Profile:

  Line Profile:        N/A

  Service Profile:     N/A

  ONU Distance:        N/A

  Online Duration:     0h 0m 0s

  FEC:                 none

  FEC actual mode:     N/A

  1PPS+ToD:            disable

  Auto replace:        disable

  Multicast encryption:disable

  Multicast encryption current state:N/A

------------------------------------------

       Authpass Time          OfflineTime             Cause

   1   0000-00-00 00:00:00    0000-00-00 00:00:00

   2   0000-00-00 00:00:00    0000-00-00 00:00:00

   3   0000-00-00 00:00:00    0000-00-00 00:00:00

   4   0000-00-00 00:00:00    0000-00-00 00:00:00

   5   0000-00-00 00:00:00    0000-00-00 00:00:00

   6   0000-00-00 00:00:00    0000-00-00 00:00:00

   7   0000-00-00 00:00:00    0000-00-00 00:00:00

   8   0000-00-00 00:00:00    0000-00-00 00:00:00

   9   0000-00-00 00:00:00    0000-00-00 00:00:00

  10   0000-00-00 00:00:00    0000-00-00 00:00:00




### FINDING ONT BY SN NUMBER


GPON#show gpon onu by sn ZTEGC123456F

Search result

-----------------

gpon-onu_1/2/3:18




### CHECKING ONT VERSION


GPON#show gpon remote-onu equip gpon-onu_1/2/3:18

Vendor ID:                 N/A

Version:                   N/A

SN:                        N/A

Admin status:              unlock

Battery monitor:           false

Security mode:             aes

Product code:              0

Total priority queue num:  0

Total traffic schedule num:0

Traffic management option: N/A

Operate status:            N/A

Equipment ID:              N/A

OMCC version:              80

Security capability:       aes

Model:                     N/A

Survival time:             N/A

Total GEM port num:        0

System uptime:             0

Region code:               N/A

Product SN:                N/A

Chip info:                 0




### CHECKNG OLT UPTIME


GPON#show system-group

System Description: C320 Version V2.1.0 Software

Started before: 6 days, 6 hours, 24 minutes

System name:  GPON




### CHECKING OLT BOARD


GPON#show card

Rack Shelf Slot CfgType RealType Port  HardVer SoftVer         Status

-------------------------------------------------------------------------------

1    1     2    GTGH    GTGHG    16    V1.0.0  V2.1.0          INSERVICE

1    1     3    PRAM    PRAM     3     V1.0.0  V1.01           INSERVICE

1    1     4    SMXA    SMXA     3     V1.0.0  V2.1.0          INSERVICE



GTGOH = 16 Port (H = Hexa)




### CHECKING OLT PROCESSOR AND MEMORY


GPON#show processor

Rack   Shelf    Slot   CPU(5s)   CPU(1m)    CPU(5m)   PhyMem(MB)  Memory

-------------------------------------------------------------------------------

1       1       2       10%       13%       13%       512         38%

1       1       4       12%       8%        8%        2048        25%




### CHECKING OLT CARD TEMPERATURE


GPON#show card-temperature

All cards temperature(deg c):

----------------------------------------------------------------------------

Rack Shelf Slot Temperature Temperature(5m) Temperature(1h) Optical-Temp

----------------------------------------------------------------------------

1    1     2    30          29              29              N/A.

1    1     3    30          30              30              N/A.

1    1     4    33          32              32              N/A.




### CHECKING OLT PER SLOT


GPON#show card slotno 2

Config-Type   : GTGH      Status        : INSERVICE

Port-Number   : 16

Cpu-Alarm-Threshold : 100%

Mem-Alarm-Threshold : 100%


Real-Type     : GTGHG     Serial-Number : 706761801136

Phy-Mem-Size  : 512MB     Main-CPU      : PowerPC Processor

M-CODE        : 140901    Hardware-VER  : V1.0.0

Cpld-VER      : V1.3      Fpga-VER      :

OtherfirmwareVER:pm.fw(V2.1.0)


BootROM-VER   : V4.0.5    2014-12-17 13:37:42

Software-VER  : V2.1.0    2017-01-17 00:40:26

Cpu-Usage     : 12%

Mem-Usage     : 38%

C-Code        : FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF00EE12

Uptime        : 6 Days, 6 Hours, 51 Minutes, 41 Seconds

Last restart reason : Other reason


GPON#show card slotno 3

Config-Type   : PRAM      Status        : INSERVICE

Port-Number   : 3

Cpu-Alarm-Threshold : 100%

Mem-Alarm-Threshold : 100%


Real-Type     : PRAM      Serial-Number : 712151100106

Phy-Mem-Size  :           Main-CPU      :

M-CODE        :           Hardware-VER  : V1.0.0

Cpld-VER      :           Fpga-VER      :

OtherfirmwareVER:


BootROM-VER   :

Software-VER  :

Cpu-Usage     :

Mem-Usage     :

C-Code        : 00000000000000000000000000000000000000

Uptime        :

Last restart reason : Power-off


GPON#show card slotno 4

Config-Type   : SMXA      Status        : INSERVICE

Port-Number   : 3

Cpu-Alarm-Threshold : 100%

Mem-Alarm-Threshold : 100%


Real-Type     : SMXA      Serial-Number : 712068000791

Phy-Mem-Size  : 2048MB    Main-CPU      : PowerPC Processor

M-CODE        : 131201    Hardware-VER  : V1.0.0

Cpld-VER      : V2.3      Fpga-VER      : V2.1.0

OtherfirmwareVER:


BootROM-VER   : V4.0.13    2017-04-26  9:53:13

Software-VER  : V2.1.0    2017-01-17 01:04:45

Cpu-Usage     : 8%

Mem-Usage     : 25%

C-Code        : 00000000000000000000000000000000000000

Uptime        : 6 Days, 6 Hours, 56 Minutes, 34 Seconds

Last restart reason : CLI Command




### CHECKING ONT IP ROUTING MODE


gpon# show gpon remote-onu ip-host  gpon-onu_1/2/1:3


Host ID:            1

HostName:           omci_ipv4_dhcp_1

Identify:

IP:                 0.0.0.0

Mask:               0.0.0.0

Gateway:            0.0.0.0

Primary DNS:        0.0.0.0

Second DNS:         0.0.0.0

DHCP-enable:        true

Ping-response:      true

Traceroute-response:true

MAC:                

KEREN.KEREN.KEREN

CurIP:              1.2.3.4

CurMask:            255.255.255.0

CurGateway:         1.2.3.4

CurPriDNS:          6.6.6.6

CurSecDNS:          7.7.7.7




### CHECKING ONT CONFIGURATION


GPON#show run int gpon-onu_1/4/1:2

Building configuration...

!

interface gpon-onu_1/4/1:2

descriptionIRONMAN

tcont 1 profile share

gemport 1 name ngenet unicast tcont 1 dir both

gemport 1 traffic-limit downstream 300m

gemport 2 name nontonfelm unicast tcont 1 dir both

gemport 2 traffic-limit downstream 300m

gemport 3 name tilpun unicast tcont 1 dir both

gemport 3 traffic-limit downstream 300m

switchport mode hybrid vport 1

switchport vlan 212  tag vport 1

switchport mode hybrid vport 2

switchport vlan 121  tag vport 2

switchport mode hybrid vport 3

switchport vlan 122  tag vport 3

!

end




### REBOOT ONT


gpon#config t

gpon#pon-onu-mng gpon-onu_1/2/1:3

gpon(gpon-onu-mng)#reboot




### RESET FACTORY ONT


gpon#config t

gpon#pon-onu-mng gpon-onu_1/2/1:3

gpon(gpon-onu-mng)#restore factory




### DISABLE/SHUTDOWN PORT ONT


gpon#config t

gpon#pon-onu-mng gpon-onu_1/2/1:3

gpon(gpon-onu-mng)#interface eth eth_0/2 state lock --> disable/shutdown port number 2




### ENABLE/SHUTDOWN PORT ONT


gpon#config t

gpon#pon-onu-mng gpon-onu_1/2/1:3

gpon(gpon-onu-mng)#interface eth eth_0/2 state unlock --> enable port number 2




###  RELEASE RENEW ONT AS DHCP CLIENT


GPON#config t

Enter configuration commands, one per line.  End with CTRL/Z.

GPON(config)#pon-onu

GPON(config)#pon-onu-mng gpon-onu_1/2/1:3

GPON(gpon-onu-mng)#ip-host 1 dhcp-enable false ping-response false traceroute-response false

GPON(gpon-onu-mng)#ip-host 1 dhcp-enable true ping-response true traceroute-response true




### CHECKING RX/TX LEVEL UPLINK PORT


GPON#sho int optical-module-info xgei_1/21/1

Optical module information:xgei_1/21/1

Basic-info:

Vendor-Name    : SOU   Vendor-Pn      : SPP1

Vendor-Sn      : D9                Version-Lev    : 10

Production-Date: 13                    Module-Type    : 10GBASE-LR

Wavelength     : 1310      (nm)         Connector      : LC

Diagnostic-info:

RxPoWer        : -10.1(dbm)           TxPower      : -1.7(dbm)

Bias-Current   : 25.724    (mA)         Laser-Rate   : 103(100Mb/s)

Temperature    : 24.184    (c)          Supply-Vol   : 3.324(v)

Alarm-thresh: –> Threshold

RxPower-Upper    : 3  (dbm)             RxPower-Lower    : -34(dbm)

TxPower-Upper    : 9  (dbm)             TxPower-Lower    : -14(dbm)

Bias-Upper       : 131(mA)              Bias-Lower       : 0  (mA)

Voltage-Upper    : 7  (v)               Voltage-Lower    : 0  (v)

Temperature-Upper: 90 (c)               Temperature-Lower: -45(c)




### RESET SLOT CARD


GPON#reset-card slotno 2




### SWAP


Use This for First Level Handling when you get Anomaly Process.

sometimes it can help you, but sometime isn’t


GPON#swap




### SHOW VLAN SUMMARY


GPON# show vlan summary

All created vlan num: 3

Details are following:

111, 222 , 333

GPON#

GPON#show vlan 111

vlanid          :111

name            :VLAN00111

description     :N/A

multicast-packet:flood-unknown

tpid:0x8100

port(untagged):

port(tagged):

gpon-onu_1/2/1:3:6

xgei_1/3/4

sg1




### CHECKING BANDWIDTH PROFLE


GPON#show gpon profile traffic

2 comments:

  1. Hello
    i have smxa v2.1.0 too but i cant configured ONT interface with switchport default vlan..., do you have advice for me please let me know

    ReplyDelete
  2. gan, cara delete vlan yang sudah ter pasang pada interface gimana ya?

    ReplyDelete